How does an air source heat pump cool?
An air source heat pump cools indoor air efficiently. Cooling basically works as reverse heating, where the device takes heat from the room air and transfers it outside. When using it for cooling, it is important to set the device to cooling mode, not automatic mode, so that it can maintain a consistently cool temperature indoors.
How should you cool down with an air source heat pump?
When using the air source heat pump's cooling function, it is recommended to set the temperature to around 23–24 degrees, which is enough to make the indoor air comfortable. This is because the air source heat pump also removes moisture from the indoor air. When cooling, it is important to keep windows and doors closed so that cool air does not escape. In addition, cooling is enhanced by preventing direct sunlight from entering the interior, for example by using blinds or curtains.
What setting should the air source heat pump be set to in summer?
In summer, it is a good idea to set the air source heat pump to 23 or 24 degrees and keep it on continuously. This prevents the structures from heating up and helps maintain a constant cool temperature. Switching the device off and on for short periods is not recommended, as it can increase energy consumption and reduce the device's efficiency.
How much does an air source heat pump cool?
An air source heat pump can cool the indoor temperature down to 18–20 degrees, depending on the outdoor temperature. However, it is generally recommended to cool the indoor air a couple of degrees cooler than the outdoor air. The electricity consumption for cooling is surprisingly low, typically less than one euro per day.
Choosing the right air source heat pump for cooling
When choosing an air source heat pump for cooling, it is important to size the device correctly based on the size of the space and other factors, such as the orientation of the windows, the area and the number of residents. As a rule of thumb, approximately one kilowatt of cooling capacity can be considered for a space of twenty square meters. Our installation service includes a free survey where our expert will help you choose a cooling air source heat pump that is correctly sized and has the right features for your specific location.
Would you like a cooling air heat pump installed in your property?
✅ Fast installations throughout the Uusimaa region.
✅ Top-quality cooling Mitsubishi, Toshiba and Gree air-source heat pumps.
✅ Almost 30 years of experience and thousands of installed air source heat pumps.
How should you maintain a cooling air heat pump?
In summer, as in any other time, the filters of an air source heat pump should be kept clean, which contributes to the performance of the device. Regular cleaning and replacement of the filters is essential for the efficient operation of the device. If you have a cooling air source heat pump that is only used in the summer, we recommend that it be serviced by a professional at least once every year or two in the spring before cooling begins. This ensures that the device operates optimally and prevents possible technical problems in advance.
Discover our Fresh Wash maintenance service >>
How much does cooling with an air source heat pump cost?
Using an air source heat pump for cooling is relatively inexpensive. The electricity consumption for cooling is typically very low. For example, in most cases, using an air source heat pump for cooling can cost less than one euro per day. However, the exact cost depends on many factors, such as the efficiency of the air source heat pump, the price of electricity used, and how much the device is used. Cooling costs can also vary depending on the size and insulation properties of the apartment.
It is important to remember that a high-quality, energy-efficient air source heat pump can save you significant cooling costs in the long run. In addition, a properly sized and regularly maintained device ensures energy efficiency and reduces costs.
